KitchenAid KDTM384ESS User Instructions

Also see for KDTM384ESS: User instructions Technical education User guide

Contents

KitchenAid KDTM384ESS User Instructions Manual pdf 11 page image

11***Cycle times may increase depending on water temperature, heavy soil condition, and options selected. Adding options will add time tothe cycle. See the options information.Sanitizes dishes and glassware inaccordance with NSF International NSF/ANSI Standard 184 for ResidentialDishwashers. Certified residentialdishwashers are not intended for licensedfood establishments. Only sanitizingcycles have been designed to meet therequirements of the NSF/ANSI 184performance standard for soil removaland for sanitization efficacy. There is nointention, either directly or indirectly, thatall cycles on a NSF/ANSI 184 certifieddishwasher meet the NSF/ANSI 184performance standard for soil removaland for sanitization efficacy.The Sani indicator glows at the end of thecycle if the Sani Rinse option wassuccessfully completed. If the indicatordoes not activate, it is probably due to thecycle being interrupted.ProWash™ToughNormalTop Rack OnlyIncreases the mainwash temperaturefrom 105°F to 140°F(41°C to 60°C) andthe final rinse from140°F to 155°F (60°Cto 68°C).:10 :50 0 - 1.5(0 - 5.7)(on some models) For addedconvenience, use for washing a smallload of dishes in the top rack to help keepthe kitchen continuously clean.Available withany cycleSlightly faster washfor smaller loads-:03 -:08 0or (on somemodels)Runs the dishwasher at a later time orduring off-peak electrical hours. Select awash cycle and options. Press the Delaybutton. Press START/RESUME. Closethe door firmly.NOTE: Anytime the door is opened (suchas, to add a dish), the Start/Resumebutton must be pressed again to resumethe delay countdown.Available withany cycleDelays the start of acycle to the specifiedtime.1:00 24:00 0IMPORTANT: Control lock button varies by model. Your model may require you to press and hold PROSCRUB UPPER,4 HOUR DELAY or BOTTLE WASH to lock the controls. The Control Lock light will turn on when the Control Lockis active.Use Control lock to avoid unintended use of the dishwasher between cycles, or cycle and option changes duringa cycle.To turn on Lock, press and hold the control lock button designated for your model for 3 seconds. The Control Lock lightwill stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button while yourdishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controlsare locked.NOTE: You may need to disable Sleep Mode by pressing either Start/Resume or Cancel, or by opening and closing thedoor before you are able to turn Control Lock off.To turn off Control Lock, press and hold the control lock button designated for your model for 3 seconds. The lightturns off.CONTROLS AND CYCLE STATUSCONTROL PURPOSE COMMENTSTo start or resume awash cycleIf the door is opened during a cycle for any reason or if the power is interrupted, theStart/Resume indicator flashes. The cycle will not resume until the Start/Resume buttonis pressed and the door is closed.NOTE: (for models with controls on top of the door) Push door firmly closed within 3seconds of pressing Start/Resume. If the door is not closed within 3 seconds, the Start/Resume light will flash, an audible tone will be heard, and the cycle will not start.OPTION SELECTIONSOPTIONS CAN BESELECTEDWITHWHAT IT DOES ADDED TIME TOCYCLE***(HH:MM)ADDEDWATERGALLONS(LITERS)MIN MAX