KitchenAid KAD-7 Technical Education

Contents

KitchenAid KAD-7 Technical Education Manual pdf 11 page image

38 72. Check the detergent dispensers. They must be filled properly for the new cycle.3. Close the door.4. Press a new cycle and/or options.5. Press Start.OPTION SELECTIONSHi Temp ScrubSelect this option to increase the target water temperature during the wash portion ofthe cycle. Hi Temp Scrub raises this target water temperature to 145° F (63° C)in the Main Wash for all cycles. In the Baked On Cookware and Heavy cycles, Hi TempScrub also raises the target water temperature to 135° F (57° C) in the pre-wash.Heating the water helps improve washing results. Hi Temp Scrub is useful whenloads contain baked-on food.This option adds heat and wash time by adding at least one additional rinse mode to the cycle.NOTE: Hi Temp Scrub is an option with Baked On Cookware, Heavy and Normal Wash.Sani RinseSelect this option to raise the water temperature in the final rinse to approximately160° F (70° C) for 10 minutes. Sani rinse adds heat and time to the cycle. In theNormal cycle, this high temperature rinse sanitizes the dishes and glassware in accor-dance with the NSF International requirements (#95/480/05/2480).NOTE: The Baked On Cookware cycle automatically uses this option. Sani Rinse is an option withHeavy and Normal Wash.Energy Saver DrySelect this energy-saving option to dry without heat. Air drying is useful when loadscontain plastic dinnerware that may be sensitive to high temperatures. The dishestake longer to dry and spotting can occur. For best drying, use a liquid rinse aid. Someitems, such as plastics, may need towel drying.NOTE: Energy Saver Dry is an option with all cycles, except Quick Rinse.Control LockUse the Control Lock to prevent the dishwasher from accidentally being turned on.Use the Lock, also, to prevent accidental cycle or option changes during a cycle. Whenthe Lock On Icon is lit, all buttons are disabled.NOTES:• The dishwasher door can be opened while the controls are locked.• The lock can be turned on while the dishwasher is running.To Turn on the Control Lock:Press and hold the Air Dry button for four (4) seconds. CONTROL LOCK will glow.-- NOTES --