714. Repeat step 8 to 10 for continuous popping.Care and Cleaningx It is strongly recommended to clean the kettle after EVERY use.x NNEVER IMMERSE THE KETTLE IN WATER OR ANY LIQUIDS.x Do not use benzene, scrubbing brushes or chemical cleaners, as these will damage the kettle.x After using the popcorn machine, allow it to cool, and use a warm damp cloth to clean the interior chamber windowsof the main unit after each use to prevent build-up.x It is strongly recommended to wash and dry the popcorn tray, measuring cup and spoon after each use. (Do NOTwash in dishwasher.)x The plexi door is removable by simply lifting it off its hinges. The door can be hand washed in warm soapy water. Donot use any abrasive cleaners, scouring pads, or steel wool.x Do not clean plastic tray with any abrasive cleansers, scouring pad or steel wool.x Light bulb is replaceable with an AC120V 10W bulb.KETTLE QUICK CLEANING PROCEDURETurn the POP control to off. Pour 4 to 6 ounces of water (NO detergent is necessary) into inner kettle pot. Switch to POP to boilthe water and let the stirrer turn in order to remove excess oil stuck on the surface. Leave on for approximately 1-2 minutes.Shut off and let cool. After cooling, pour out the water out and discard. CAUTION: THE KETTLE MAY BE HOT.You may also remove the kettle and clean it with a non-abrasive scouring pad (Not included). NNEVER immerse kettle orelectrical plug in water or other liquids.