1. Construction2. Battery installationBefore using the telephone it is important that you connect the battery to the connector in the battery box. Assem-ble the back cover as described below and place the handset into the charger.1. Push the back cover 5 mm towards the headset plug using your thumbs.2. Lift off back cover.3. If the battery is not already installed, place battery plugin the slot in the battery box.4. Insert battery with the label readable and replace cover.45Key for internal calls(not used on KIRK dect-z system 1500)Keyboard LOCK(Menu*)MENU key Display with backlightRecall key(MAIL key)SILENT(Menu#)ON/OFF HOOK key-also used as turn ON keyCONFIRMATION key -MUTE microphone.MUTE ringer when ringing.Long key press turns OFF.Right arrow key, save number.Telephone book menu fromstandby textLeft arrow key, Redial menufrom standby textVolume up/downLEDPlace the battery plug in the slotwith red wire closest to the mark*(see figure)Headset Connector(ACS Stratus Ultra)Kirk Z-3040 håndsæt 14021600 26/03/03 9:35 Page 3 (Black/Process Black plate)