Kingston Technology IRONKEY D300SM User Manual

Contents

Kingston Technology IRONKEY D300SM User Manual Manual pdf 8 page image

8Setting Up A D300SM Device With SafeConsoleThe initialization process will begin by allowing the device to be ready to communicate with theSafeConsole server. The steps needed to register a D300SM to SafeConsole will depend on thepolicies that your administrator is enforcing. Not all dialogs will be shown.A SafeConsole Connection Token will be needed. The SafeConsole Connection Token is obtainedby the System Administrator through the Quick Connect Guide, located inside of the SafeConsoleuser interface.1. Enter the SafeConsole Connection Token that is obtained in the steps above. Review thelicense agreement, check the checkbox to accept it, and click Activate in the bottomleft-hand corner.• Optionally Enabled Policies - These policies may or may not be enabled by your SystemAdministrator. They will appear during device registration if they have been enabled.– Confirm Ownership of the device: Enter the Windows username and password that isassociated with the login credentials of the computer the device is plugged into.– Unique User Token: This token is directly associated with the end user’s account andwill be provided by the System Administrator.– Administrator Registration Approval: The System Administrator may require theirapproval to proceed with device registration.2. Enter a secure Password and Confirm it. Once the password created meets the requirementslisted to the right side of the input fields, click Continue. The requirements of this password willdepend on the policy selected by your administrator.3. Choose a Secure Volume File System (see Formatting My Device) and click Continue.4. The device will now finalize the setup process and be ready for use. Access the EncryptedStorage by clicking the Folder Icon in the top menu. The settings of the device can beaccessed and altered by clicking the Gear Icon. See the IronKey Control Panel for moreinformation.Setting Up A Managed Device With IronKey EMSThe initialization process will begin by allowing the device to be ready to communicate with theIronKey EMS server.An IronKey EMS Activation Code will be needed. The IronKey EMS Activation Code is obtained bythe System Administrator through the IronKey EMS Console. This code can also be emailed to theend user.1. Enter the IronKey EMS Activation Code that is obtained in the steps above. Review the licenseagreement, check the checkbox to accept it, and click Activate in the bottom left-handcorner.2. Enter a secure Password and Confirm it. Once the password created meets the requirementslisted to the right side of the input fields, click Continue.