King Instrument 7310 Series Installation Instructions Manual

King Instrument 7310 Series Installation Instructions Manual Manual pdf 1 page image

(714) 891-0008 • www.kinginstrumentco.comWhen it comes to flow...we’re instrumental.17310 Series Installation InstructionsFLOW METER LIMITED WARRANTYMeters are warranted against defects in materials and workmanship to the original user for a period of thir-teen (13) months from the date of factory shipment, provided the meter is installed, operated and maintainedin accordance with King Instrument Company’s instructions and recommendations.This warranty does not apply if failure is caused or contributed to by any of the following: improper handling,improper storage, abuse, unsuitable application of the product, lack of reasonable and necessary mainte-nance, use exceeding suggested pressure and temperature maximums, improper packaging for return, orrepairs made or attempted to be made by anyone other than King Instrument Company, Inc.KING INSTRUMENT COMPANY, INC. MAKES NO WARRANTY AS TO THE FITNESS OF ITS PRODUCTS FOR SPECIFICAPPLICATIONS.This warranty is valid for the original end-user only and does not apply to products that have been damagedor modified. This warranty is non-transferrable and is limited to replacement or repair. The liability of King In-strument Company arising out of its supply of the products, or their use, shall not in any case exceed the costof correcting defects in the products as set forth above.THIS WARRANTY IS A LIMITED WARRANTY AND SHALL BE IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED ORIMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. THERE ARE NO OTHER WARRANTIES WHICH EXIST BEYOND THE DESCRIPTION OR FACEHEREOF.IN NO EVENT SHALL KING INSTRUMENT COMPANY BE LIABLE FOR LOSS OF PROFITS, INDIRECT, CONSEQUEN-TIAL OR INCIDENTAL DAMAGES.Products should be returned, prepaid, to King Instrument Company, Inc. with proof of purchase. Call factoryfor Return Merchandise Authorization (RMA) number and return instructions.THIS IS IMPORTANT INFORMATION.READ IT CAREFULLY BEFORE BEGINNING WORK.1) Inspect meter for damage that may have occurred during shipping.Report any damage to the container to the freight carrierimmediately.2) Make sure your pressure, temperature, fluid and other requirementsare compatible with the meter (including o-rings.)3) Select a suitable location for installation to prevent excess stress onthe meter which may result from:a) Misaligned pipe.b) The weight of related plumbing.c) “Water Hammer” which is most likely to occur when flow issuddenly stopped as with quick closing solenoid operated valves.(If necessary, a surge chamber should be installed. This will alsobe useful in pressure start-up situations.)d) Thermal expansion of liquid in a stagnated or valveisolated system.e) Instantaneous pressurization which will stress the meter andcould result in tube failure.NOTE: In closed thermal transfer or cooling systems, install the meterin the cool side of the line to minimize meter expansion and contrac-tion and possible fluid leaks at the threaded connections.4) Handle the meter carefully during installation.a) Use an appropriate amount of teflon tape on external pipethreads before making connections. Do not use paste or sticktype thread sealing products.5) Install the meter vertically with the inlet port at the bottom.6) Meters with stainless steel fittings will support several feet of pipeas long as significant vibration or stress resulting from misalignedpipe are not factors.ADDITIONALLY7310 Series meters are designed for vertical installation only. (Inlet atbottom, Outlet at top)Max Non-Shock Pressure and TemperatureFitting Temp Pressure316LSSPVC & PVDF200° F130° F200 psig (41W-103W)150 psig (41W-72W)125 psig (90W-103W)Ambient Temp. 33° F -125° F

/ 4

Related manuals for King Instrument 7310 Series