Kinetico Kube Manual

Also see for Kube: Installation instructions

Contents

Kinetico Kube Manual Manual pdf 7 page image

51 Check ClearanceClean out the area under your sink,and ensure that there is enoughroom for your Kube. Kube mustbe installed in upright position ona level surface. Make sure the backof Kube isn’t touching the back ofthe cabinet; you’ll need space forthe connections.4 Connect the AdaptersTwo adapters are provided in the KubeInstallation Kit. Thread the female adapteronto the cold water shutoff valve, andthread the male adapter onto the coldwater supply line, as shown. Hand-tighteneach adapter.Cold2 Shut Off the WaterTurn off your cold water at the inlet. Turnon your faucet to make sure that the wateris completely off. TIP: The cold water valveis usually on the right side.HotCold3 Disconnect Cold WaterSupplyUsing a wrench, disconnect the coldwater supply line from the shutoff valve.Do NOT disconnect the hot water! TIP:Place a towel or paper towels under thesink to collect any water that may run outof the cold water line.HotColdConnecting Your Kube