Kinetico 2020c Owner's Manual

Also see for 2020c: Owner's manual Installation instructions Installation instructions

Contents

Kinetico 2020c Owner's Manual Manual pdf 7 page image

2020c WATER SOFTENEROwner’s Manual2020c WATER SOFTENEROwner’s Manualfreephone 0800 0151 380 13visit www.kinetico.co.uk12freezing. If you have any questions about your Kinetico 2020c, or you suspect that your systemisn’t working properly, contact your local Kinetico dealer.By-PassThere may be times when you need to shut off the water supply to your entire house. To do this,set the by-pass valve to the “OFF” position. No water will flow through the house. To restart thewater, set the by-pass valve to the “SERVICE” position. You may put the softener into by-pass atany time if necessary by putting the by-pass valve into the “BY-PASS” position. You will still getwater throughout the house, however all of the water will be treated. To return the softener toservice, set the by-pass valve to the “SERVICE“ position.Note: By-pass styles vary and yours may not be as described. Contact your local Kinetico dealerfor further assistance.SERVICEOFFBYPASSKinetico By-Pass ValveServiceBy-passclosedInletopenOutletopenInletclosedTurnclockwiseTurn counterclockwiseOutletclosedInletclosedOutletclosedBy-passBy-passopenOffBy-passclosed13Cold Weather protectionIf your Kinetico 2020c is installed outside or in an area that is not heated, you may want totake precautionary measures to prevent damage to your unit from freezing. Kinetico offercabinets specifically designed to protect your softener from freezing temperatures. Pleasecall your local dealer for more information.NOTE: Kinetico’s warranty does not cover damage caused to your system due to freezing.If you have any questions about your Kinetico 2020c, or you suspect that your system isn’tworking properly, contact your local Kinetico dealer.By-passThere may be times when you need to shut off the water supply to your entire house.To do this, set the by-pass valve to the “OFF” position. No water will flow through thehouse. To restart the water, set the by-pass valve to the “SERVICE” position.You may put the softener into by-pass at any time if necessary by putting the by-pass valveinto the “BY-PASS” position. You will still get water throughout the house, however all ofthe water will be treated. To return the softener to service, set the by-pass valve to the“SERVICE“ position.NOTE: By-pass styles vary and yours may not be as described. Contact your local Kineticodealer for further assistance.Fig. 10

/ 9

Related manuals for Kinetico 2020c