Kinetec Maestra Series User Manual

Kinetec Maestra Series User Manual Manual pdf 8 page image

Kinetec Maestra™ EN 7 / 2610. Electrical connection2 versions of electrical protection are available for the deviceKinetec Maestra™ machine. The identification label shows whichversion a machine is equipped with:Type BF, Class II devices,for home use, bear the following symbols:Type B class I devices,for use in a professional environment, bear the following symbol:See page 23 for the meaning of the symbols.Before connecting the device to the power supply, check that themains voltage matches that shown on the identification plate(100-9a+] Connect the hand control (1)Connect the power supply cable (2).IMPORTANTFor Type B Class I devices, and to avoid all risks of electric shock, the machine should only beconnected to a power supply that has protective earthing.To connect the power supply, only use the original cable supplied with the machine.Check that the cables remain free around the device so that they do not get damaged.Check that the machine is not damaged, in particular the protective housings.11. Procedure to start the machinePress the ON / OFF switch (3).The display comes on, the machine carries out a self-test and the display shows in successionYour device Kinetec Maestra™ is ready to be used.Warning: Always check the motion parameters displayed on the hand control before starting thedevice.12. Using the hand control12.1. Changing the display languageBeginning Keys topress Display RemarksSwitch the unit ONKINETECMAESTRA Vxx.xCheck that the hand control is notlocked (See page 8).KINETECPLEASE WAITKINETEC40 STOP 50 110Press simultaneously on the 2 keys Language:ENGLISHThe display indicates the languageselected.To change the languageOrLanguage:FRENCHThe French language is selected.Available languages: English, French,German, Italian and Spanish.To confirm the new language OKSWITCH ON/OFFSwitch the machine offand then on againto apply the changeddisplay language.12 3