Kimo CT 110 User Manual

Kimo CT 110 User Manual Manual pdf 1 page image

TachometerCT 110DESCRIPTION OF THE DEVICEOK keyBacklight keySelect keyOn/Off/Esc keyHold/min/max keyPERFORM A MEASUREMENT➢ Turn on the device by pressing on « On/Off/Esc ».The device displays its name « CT110 ».➢ Put the probe to the required location.The device displays the measured velocity.FREEZE THE MEASUREMENTDuring a measurement :➢ Press on « Hold/min/max » to freeze the measurement.« Hold » displays on screen and the measurements are frozen.➢ Press on « On/Off/Esc » to exit the hold function.The device returns to the measurements display.If the type of selected probe is the contact probe, put the contact tip on the probe.DISPLAY THE MINIMUM AND THE MAXIMUMOnce the measurement are frozen :➢ Press again on « Hold/min/max ».● The device displays the maximum value of velocity measured since the last questioning at the top of the screen and theminimum value of velocity measured since the last questioning at the bottom of the screen.➢ Press again on « On/Off/Esc » to return to the measurement display.

/ 4

Related manuals for Kimo CT 110