Menu
Kidde Vega User Manual
                                 | |
TM0024 Page 26 of 33 Issue 2.015.3 OUTPUT GROUPSSelection of this option a list of two menu options will appear, as shown in figure 4.8.The required option can be highlighted by operation of the arrow keys and whencorrect the Enter key will enter the selected option menu.Access level 2 List output groupsAll groupsGroup InformationSelect option using ↑ & ↵figure 4.8All GroupsWhen selected the display will request for a start and end group number to beselected by use of either the arrow or numeric keys and operating Enter when theselection is complete. Once selected the display will list the group information whichhas been programmed into the control panel. Operation and display is similar informat to the List All Zones option as in section 5.1.1. The main difference is that thezone text is replaced with “Group” text.Operation of the arrow keys will scroll the information on the display. When viewing iscomplete operation of the Cancel key will quit the display to the menu and continuedoperation will return the panel to access level 1.Group InformationWhen selected this will list the group information which has been programmed in thecontrol panel as shown in figure 4.9. Operation and display is similar in format to theList Zones Information option as in section 5.1.2. The main difference is that thezone text is replaced with “Group” and all the output devices assigned to the selectedoutput group will be listed.Access level 2 List output groupsGroup 001 Production activationsT3 010s override Y T4 020m override YAction on program Evacuate NoDeactivate on silence alarmsD010.1 Loop 01Mblc Scct1↑ to scroll, → to quitFigure 4.9 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved