Kidde SLED177i User Manual

Kidde SLED177i User Manual Manual pdf 1 page image

ATTENTION! The model SLED177i strobe light is designed to notify hearing impairedindividuals of impending danger. The strobe light has no detection means and MUST beused in conjunction with operating and interconnected Smoke, Heat, or CarbonMonoxide Alarms.The model SLED177i AC wire-in Strobe light can be directly interconnected with KiddeSafety 3-wire Smoke, Heat and CO alarms. It will produce an intermittent strobe flashpattern (approximately 4 flashes, followed by approximately 5 seconds off) when trig-gered by a Carbon Monoxide alarm and a flash every second when triggered by asmoke or heat alarm.Thank you for purchasing this strobe light. It is an important part of your family’s homesafety plan. You can trust KIDDE Safety to provide the highest quality safety products.We know you expect nothing less when the lives of your family are at stake.For model: SLED177i1102-7201-00StrobeLightFor your convenience, write down the following information. If you callour Consumer Hotline, these are the first questions you will be asked.Strobe Light Model Number(located on back of alarm):Date Code (located on back of device):Date of Purchase:Where Purchased:SLED177iStrobe Light User Guide