Installation Guide)Keysight - N5224/5BAdd 4-Port CapabilityFor Version 7 Synthesizers(For Models WithDirect Digital Synthesizers (Only))- Installation GuideTo Upgrade N5224/5B SeriesOption 200 to Option 400 -(900 Hz/10 MHz - 43.5 GHz)(900 Hz/10 MHz - 50 GHz)Upgrade Kit Order Numbers:N5224BU- 660 and N5225BU- 660Keysight Kit Number: N5225-60136This is the Installation Guide for the N5224/5B Series Microwave Network Analyzers.

Keysight N5224B Installation Manual

N5224B

Find us at www.keysight.com

PNA Family Network Analyzer Configurations

Test set and power configuration options

PNA-X Series Test Set and Power Configuration Options

PNA Series Test Set and Power Configuration Options

PNA-L Series Test Set and Power Configuration Options

PNA Family Applications and Options

Noise figure options and applications

PNA-X block diagrams with noise figure option

Noise figure measurement summary

Pulse, antenna, mm-wave applications and options

Accessories

ordering information

PNA Family Network Analyzer Upgrade Kits

Upgrade paths

Applications

Test set options

Measurement Accessories

For devices with 1.0 mm connectors

For devices with 2.4 mm connectors

For devices with K connectors (2.92 mm)

For devices with 3.5 mm or SMA connectors

For devices with Type-N connectors

For devices with 7 mm connectors

Verification kits

General Accessories

Information in This Chapter

Chapter One at-a-Glance

Safety Symbols

General Safety Considerations

Servicing

Electrostatic Discharge Protection

ESD Equipment Required for the Installation

Regulatory Information

Lithium Battery Disposal

N5292A Test Set Equipment Ratings

Environmental Requirements

Required Conditions for Accuracy Enhanced Measurement

Introduction

Network Analyzer Requirements

System Configurations

N5292A Test Set Description

Rear Panel Features

Interconnect Kits, Rackmount Kits, and Optional Parts

Millimeter System Rackmount Kits

Compatible Millimeter-wave Modules

Basic System Measurement Configurations

Getting Prepared

Getting Assistance from Keysight

Receiving the System

Review the Principles of Connector Care

PNA, Controller, and Test Head Module Interconnections

Rear Panel Cabling

Front Panel Cabling

OML/VDI Millimeter-wave Module Cable Connections

Configuring the PNA Software for a Self Configured System

OML/VDI and N5293A/5A Test Heads – Banded Configuration Calibration (Only)

Detailed Procedure

Running the Calibrations (LO, RF, and IF)

RF Calibration

IF Calibration

Initializing the Banded Millimeter-wave System

Running the Installation Calibration (Broadband Systems Only)

Troubleshooting the OML/VDI MiIlimeter Modules

Preliminary Checks

System Verification

Measurement Traceability

Performing System Verification

If the System Verification Fails

Maintenance

Keysight Support, Services, and Assistance

Shipping an Item to Keysight for Service or Repair

N5225B

Keysight N5224B Installation Manual

Product

Learn More

Legal