OneStart
Menu
Home
Features
Browser
Content
Partner
Coupons
Manuals
Blog
Download
Search
Manuals database
Brands
Keysight
Portable Generator
M8190A
Keysight M8190A User Manual
Keysight M8190A User Manual
Also see for M8190A:
User guide
Table of content
Contents
safety summary
safety symbols
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Document History
Options
The Front Panel of the Two Channel Instrument
The Front Panel of the One Channel Instrument
modes of operation
NRZ / DNRZ / Doublet
Delay Adjust
Installing Licenses
Introduction
Launching the M8190A Soft Front Panel
status bar
file menu
help menu
Driver Call Log
Errors List Window
Clock Tab
Output Tab
Standard Waveform Tab
Multi-Tone Tab
Complex Modulation Tab
Import Waveform Tab
Sequence Table Tab
Status/Control Tab
Correction File Format
M8190 Soft Front Panel and M8190 Firmware
Sequence Table
Sequencer Granularity
trigger modes
Gated
Advancement Modes
Single
Logical Functions
Internal Trigger Generator
Sequencer Execution Flow
arbitrary mode
Sequence Mode
Scenario Mode
Dynamic Sequencing
Dynamic Continuous
Dynamic Triggered
Idle Command Segments
Limitations
Direct Mode
Digital Up-Conversion Modes
Configuration at Run-Time
Markers in Interpolated Modes
Configuration using Standard Data Segments
Configuration using Configuration Segments
Sample-Aligned Configuration Using Markers
Amplitude Scaling
Scaling by using the action table
Coarse Delay and Digital Up-Conversion
Streaming Implementation Using the Ring Buffer Mechanism
Requirements
theory of operation
Examples
Memory Ping-Pong
Pause Between Multiple Marked Samples
Sync Markers
Block Diagram
Operating in the Low Phase Noise Mode
IVI-COM Programming
SCPI Programming
Programming Recommendations
System Related Commands (SYSTem Subsystem)
SYSTem:LICense:EXTended:LIST
SYSTem:SET[?]
SYSTem:VERSion
Common Command List
SRE[?]
Status Model
STATus:PRESet
Questionable Data Register Command Subsystem
Operation Status Subsystem
Voltage Status Subsystem
Frequency Status Subsystem
Connection Status Subsystem
ARM/TRIGger Subsystem
ARM[:SEQuence][:STARt][:LAYer]:CDELay[1|2 coarse_delay>|MINimum|MAXimum
ARM[:SEQuence][:STARt][:LAYer]:RNOisefloor[1|2 OFF|ON|0|1
INITiate:CONTinous[1|2][:STATe][?] OFF|ON|0|1
INITiate:IMMediate[1|2]
ARM[:SEQuence][:STARt][:LAYer]:TRIGger:LEVel level>|MINimum|MAXimum
ARM[:SEQuence][:STARt][:LAYer]:TRIGger:IMPedance LOW|HIGH
ARM[:SEQuence][:STARt][:LAYer]:TRIGger:SOURce EXTernal|INTernal
ARM[:SEQuence][:STARt][:LAYer]:EVENt:LEVel level>|MINimum|MAXimum
ARM[:SEQuence][:STARt][:LAYer]:EVENt:SLOPe POSitive|NEGative|EITHer
ARM[:SEQuence][:STARt][:LAYer]:DYNPort:WIDTh LOWerbits|ALLBits
TRIGger[:SEQuence][:STARt]:ENABle[1|2]:HWDisable[:STATe 0|1|OFF|ON
TRIGger[:SEQuence][:STARt]:BEGin[1|2]:HWDisable[:STATe 0|1|OFF|ON
TRIGger[:SEQuence][:STARt]:ADVance[1|2]:HWDisable[:STATe 0|1|OFF|ON
TRIGger - Trigger Input
TRIGger[:SEQuence][:STARt]:BEGin[1|2][:IMMediate]
TRIGger[:SEQuence][:STARt]:ADVance[1|2][:IMMediate]
FORMat:BORDer NORMal|SWAPped
INSTrument Subsystem
INSTrument:SLOT[:NUMBer]
INSTrument:IDENtify:STOP
INSTrument:MMODule:MODE
MMEMory Subsystem
MMEMory:COPY <string>,<string>[,<string>,<string>]
MMEMory:DATA <file_name>, <data
MMEMory:DATA? <file_name
MMEMory:MDIRectory <directory_name
MMEMory:RDIRectory <directory_name
MMEMory:STORe:CSTate <file_name
OUTPut[1|2]:COMPlement[:STATe][?] OFF|ON|0|1
OUTPut[1|2]:ROUTe[:SELect][?] DAC|DC|AC
OUTPut[1|2]:DIOFfset[?] <value>|MINimum|MAXimum
Sampling Frequency Commands
SOURce]:FREQuency:RASTer:LPNoise:ACTive OFF|ON|0|1
SOURce]:FREQuency:RASTer:LPNoise:ENABle OFF|ON|0|1
SOURce]:FREQuency:RASTer:SOURce[1|2 INTernal|EXTernal
Reference Oscillator Commands
SOURce]:ROSCillator:SOURce:CHECk EXTernal|AXI|INTernal
DAC|DC|AC Subsystem
SOURce]:DAC|DC|AC[1|2]:VOLTage[:LEVel][:IMMediate AMPLitude[?] <level
SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:HIGH level
SOURce]:DC[1|2]:VOLTage[:LEVel][:IMMediate]:TERMination level
SOURce]:VOLTage[1|2][:LEVel][:IMMediate][:AMPLitude level
SOURce]:VOLTage[1|2][:LEVel][:IMMediate]:HIGH level
MARKer Subsystem
SOURce]:MARKer[1|2]:SAMPle:VOLTage[:LEVel][:IMMediate OFFSet[?] <level
SOURce]:MARKer[1|2]:SAMPle:VOLTage[:LEVel][:IMMediate LOW[?] <level
SOURce]:MARKer[1|2]:SYNC:VOLTage[:LEVel][:IMMediate OFFSet[?] <level
SOURce]:MARKer[1|2]:SYNC:VOLTage[:LEVel][:IMMediate HIGH[?] <level
SOURce]:FUNCtion[1|2]:MODE ARBitrary|STSequence|STSCenario
SEQuence Subsystem
SOURce]:SEQuence[1|2]:DATA[?] <sequence_id step>[,<length>|,<value>,<value>...|,<data block>]
SOURce]:SEQuence[1|2]:DELete <sequence_id
SOURce]:SEQuence[1|2]:DELete:ALL
SOURce]:SEQuence[1|2]:FREE
SOURce]:SEQuence[1|2]:ADVance[?] <sequence_id AUTO|CONDitional| REPeat|SINGle
SOURce]:SEQuence[1|2]:NAME[?] <sequence_id name
STABle Subsystem
Generating scenarios
SOURce]:STABle[1|2]:DYNamic:HWDisable[:STATe OFF|ON|0|1
SOURce]:STABle[1|2]:SEQuence:STATe
SOURce]:STABle[1|2]:DYNamic:[STATe][?] OFF|ON|0|1
SOURce]:STABle[1|2]:SCENario:SELect sequence_table_index
SOURce]:STABle[1|2]:SCENario:COUNt[?] <count
TRACe Subsystem
Waveform Granularity and Size
Waveform Data Format in Direct Mode
Arbitrary Waveform Generation
TRACe[1|2]:DEFine:NEW? <length init_value1>[,<init_value2>]]
TRACe[1|2]:DEFine:WONLy <segment_id length>[,<init_value1>[,<init_value2>]]
TRACe[1|2]:DEFine:WONLy:NEW length>[,<init_value1>[,<init_value2>]]
TRACe[1|2][:DATA][?] <segment_id offset>,(<length>|<block>|<numeric_values>)
QONLy|BOTH,ON|OFF|1|0,[,ALENgth|FILL|[,<init_valueI init_valueQ> [,<ignore_header_parameters>]]
TXT|TXT14|TXTD|BIN|BIN6030 ALENgth|FILL|[,<dac_value>]]
TRACe[1|2]:DELete <segment_id
TRACe[1|2]:DELete:ALL
TRACe[1|2]:FREE
TRACe[1|2]:NAME[?] <segment_id>,<name
AUTO|CONDitional|REPeat|SINGle
TRACe[1|2]:COUNt[?] <count
TEST Subsystem
CARRier Subsystem
SOURce]:CARRier[1|2]:FREQuency:INTegral frequency_integral>|MIN|MAX|DEFault
SOURce]:CARRier[1|2]:FREQuency:FRACtional frequency_fractional>|MIN|MAX|DEFault
SOURce]:CARRier[1|2]: POFFset [?] <phase- offset MINimum|MAXimum|DEFault
FTABle Subsystem
SOURce]:FTABle[1|2]:RESet
SOURce]:ATABle[1|2]:RESet
ACTion Subsystem
SOURce]:ACTion[1|2]:APPend action_sequence_index>,<action>[,<value> [,<value>]]
SOURce]:ACTion[1|2]:DELete <action_sequence_id
Performance Specification
Resampling Algorithms for Waveform Import
Resampling Methodology
Resampling Modes
User’s Guide
K
e
y
s
i
g
h
t
M8190A
Arbitrary Waveform
Generator
Next
/ 320
Related manuals for Keysight M8190A
Keysight M8121A User Manual
Keysight 33210A User Manual
Keysight E8357D User Manual
Keysight MIPI M-PHY User Manual
Keysight MIPI N5991MC2E User Manual
Keysight EDU33210 Series User Manual
Keysight X-Series Manual
Keysight E8267D Manual
Keysight N5166B Manual
Keysight E8257D Option H1K User Manual
This manual is suitable for:
M8190A
