Keys Fitness CardioZone CZ PRO Owner's Manual

Contents

Keys Fitness CardioZone CZ PRO Owner's Manual Manual pdf 18 page image

18Our treadmill is equipped with a software package that will perform a calibration sequence unique toyour specific model number. Please perform the following steps to calibrate the Cardio Zone CZPRO TREADMILL.1. Unplug power cord from outlet strip.2. Attach Safety Key to console.3. Plug power cord into outlet strip.4. Initiate calibration sequence. Locate hole on the back of the console and insert the eraser end of apencil through the hole and press the calibration switch twice. As show on page 14.5. CL21 should appear in the Time window, if not, continue to press the calibration switch until CL21appears.Note: During the calibration sequence, the Time window will display which step you are at in theprocess (C21, C22, C23 and so on). The CAL/DIST window will display which key should be enterednext. For example, “E” for Enter, “P” for Power, or “SS” for Start / Stop.6. CL21: MPH or KPH will be flashing in the Speed window, pressing the Speed +/ - button will tog-gle options. Choose MPH (KPH), press Enter.7. CL22: 8, 10, or 12 (13, 16, or 20 in KPH mode) will be displayed in the Speed window, pressing theSpeed +/ - button will toggle options. Choose 10 (or 16 for KPH mode), press Enter.8. CL23: FFF, UUU, or HHH will be displayed in the Speed window, pressing the Speed +/ - buttonwill toggle options. Choose FFF, press Enter.9. CL24: 111 or 222 will be displayed in the Speed window, pressing the Speed +/ - button will toggleoptions. Choose 111, press Enter.10. CL25: AL1 or AL2 will be displayed in the Speed window, pressing the Speed +/ - button willtoggle options. Choose AL2, press Enter.11. CL26: OPA or OPI will be displayed in the Speed window, pressing the Speed +/ - button willtoggle options. Choose OPA, press Enter.12. CL27: Blank (nothing), “a”, “b”, “c”, or “d” will be displayed in the Incline window, pressing theSpeed +/ - button will toggle options. Choose Blank, press Enter.13. CAL/DIST window will display “E”, Press Enter. “55” will display in CAL/DIST window.14. Press Start/ Stop.15. At this time, make sure you are not standing on the walking belt, as the machine will automaticallyinitiate belt movement and run through a complete calibration and diagnostic routine.Press Enter, belt will begin to move, unit will begin self-calibration.16. When Speed and Incline calibration has finished, press Power button twice, display should blank,and treadmill should be ready for use.To avoid possible damage to the treadmill and the possibility of injury, do notoperate the treadmill until the problem is corrected. Call CardioZone TechnicalService at (877) 855-0003.Calibration Sequence

/ 20

Related manuals for Keys Fitness CardioZone CZ PRO