Keys Fitness Alliance 850 Owner's Manual

Contents

Keys Fitness Alliance 850 Owner's Manual Manual pdf 6 page image

6Assembly InstructionsMinor Assembly Required!Alliance 850 and 880HR treadmills are shipped in two pieces: the console upright assembly andthe base assembly. After opening the box, remove any packing materials from the treadmill. Donot throw away any packing materials until the unit is working properly. The treadmill boxcontains a package that includes the Owners Manual, a RED SAFETY KEY, and a beltadjustment tool. The 880HR will also contain the heart rate chest strap. The treadmill will notoperate without the Red Safety Key.The console upright assembly is attached to the base assembly. Place the unit on a clean, levelsurface near an electrical outlet (extension cords are not recommended).1. Raise the console into an upright position. Loosely install both 3/4” buttonhead screws oneach side of the upright. Install and tighten each 3 1/2” x 5/16” bolt (2) with washers from thebottom of the base frame through the upright lock (diag. 1).2. Now tighten the buttonhead screws securely from step 1.3. Tighten the black, flathead pivot bolts on the inside of upright.4. Install motor hood cover using 5/8” phillips head screws (8 screws).Be sure the treadmill is level to the floor. The rear feet can be adjusted to level the treadmill.Assembly is now complete!