Key-Disp KD21C User Manual

Also see for KD21C: User manual User manual User manual User guide

Key-Disp KD21C User Manual Manual pdf 14 page image

11◆Controller Over-Current Cut SettingsCUR represents controller over-current cut settings. CUR value canbe changed from 7.0A to 22.0A. The default value is 15A.To change basic settings, press the UP/DOWN button to increaseor decrease the value of the current.Hold the MODE button for 2s and then return to previous menu.CUR Settings Interface◆Power Assistant Sensor SettingsThe Direction of Power Assistant Sensor SettingsPAS represents power assistant sensor settings. “run-F” meansforward direction, while “run-b” means back direction. The default value is“run-F”.To change The Direction of Power Assistant Sensor Settings, pressthe UP/DOWN button to select F or b.Briefly press the MODE button and then access settings mode ofPAS sensitivity.Direction of PAS Sensor SettingsThe Sensitivity of PAS SettingsSCN represents the sensitivity of PAS settings. The sensitivity valueranges from “2” to “9”. “2” is the strongest, “9” is the weakest. The defaultvalue is “2”.