TroubleshootingMost cooking problems are caused by little things you can find and fix without tools of any kind. Check the listsbelow and on the next page before calling for assistance or service.RANGE DOES NOT WORKPROBLEM CAUSE/SOLUTIONNothing works • The range is not plugged into a properly grounded live outlet with the propervoltage. (See Installation instructions.)• A household fuse has blown or a circuit breaker has been tripped.• The control knob is net set correctly. Push in the control knobs beforeturning them.• The Oven and Cooktop Lockouts have been set.The oven does not work • The electronic control is not set correctly. Refer to setting the electronicoven control section. (See pp. 14-34.)• A delay start has been set. Wait for the start time to be reached or canceland reset the control.• The Oven Lockout has been set.The surface cooking • A household fuse has blown or a circuit breaker has been tripped.zones will not work •The control knobs have not been set correctly. Push the control knobs inbefore turning them to a setting.eThe cooking element is burned out. Call a Sears Service Center forreplacement or repair.• The Cooktop Lockout has been set.Cannot boil on left front • Press the SURESIMMER button to OFEsurface cooking zone/ • Turn left front control knob to HI for a rapid boil.SURESIMMER TM featureSURESIMMER will not • Turn left front control knob on between the SURESIMMER LO and 4 settings,simmer along with pressing the SURESIMMER button on.SURESIMMER surface • Turn left front control knob to "4", along with pressing the SURESIMMERcooking zone does not button on.get hot enoughWHEN SELF-CLEANING YOUR OVENPROBLEM CAUSE/SOLUTIONThe Self-Cleaning cyclewill not work• START/ENTER has not been pressed.• A delayed start has been set. Wait for the start time to be reached or canceland reset the control.• The door is not closed all the way.46