Kenmore POWER MISER 153.316152 Owner's Manual

Contents

Kenmore POWER MISER 153.316152 Owner's Manual Manual pdf 12 page image

Installation Instructions (cont'd)Converting the LowerElement (cont'd)9. Replace terminal cover on thermostat making sure that thelocking tabs on the terminal cover are in place.12. Complete wiring to the water heater, or if completed, turn"ON" electric power to the water heater after filling thetank with water._E,WARNINGMake sure the thermostat is flush against the tank, theterminal cover is in place, and the insulation _sreplaced.Failure to do so can result in DEATH, SERIOUS BODILYNJURY,OR PROPERTY DAMAGE.10. Replace the insulation block so that it completely coversthe thermostat and element._, CAUTIONNever use this water heater unlessit is completely full ofwater. To prevent damage to the tank and heating ele-ment, the tank must be filled with water. Water mustflow from the hot water faucet before turning "ON"power.11. Replace the access panel.12