Kenmore 790.9535* Use & Care Manual

Contents

Kenmore 790.9535* Use & Care Manual Manual pdf 12 page image

Oven Control FunctionsREAD THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyouroven, become familiar withthe various pad functions of the oven as described below.CLOCK SETPAD Usedto set thetime of day. _-..TIMER SET/OFFPAD Used to setor cancel the minutetimer. The minutetimer does not startor stop cooking.Also.TIMER SET/OFF padis used to set theContinuous BakefeatureCOOK TIME UP and DOWN ARROW PADS-- Used along BAKE PAD--UsedPAD-- Used to with the function pads to select oven to select the bakeenter the length of temperature, cook time, start time (when function.the baking time. programming an automatic start time), time ofday, clean time and minute timer.\////.//DELAY START PAD-- Usedto set the desired start timefor baking & Self-Clean. Maybe used with COOK TIME toprogram a delayed bakecycle.o, .., - ....o..oo®FEATURE I NDICATORLIGHTS-- These light toY show which feature is inuse.® BROIL PAD-- Used toselect the variable broilfunction._yLit}OVEN, PREHEAT & DOOR LOCKED LIGHTS* The "OVEN" lightwill glow each time the oven turns on to maintain the set oventemperature. The "PREHEAT" light will glow when the oven is firstset to operate, or if the desired temperature is reset higher than theactual oven temperature. The "DOOR LOCKED" light will flashwhen the oven door locks and unlocks or when using the Self-Clean cycle or the oven door lockout is activated. The indicator lightwill glow constantly after the door locks.SELECTSELF-CLEANPAD-- Used to select theSelf-Cleaning cycle. A 2,3 or 4 hour Self-Cleantime may be selected.STOP/CLEAR PAD--Used to clear anyfunction previouslyentered except the timeof day and minute timer.Press STOP/CLEAR tostop cooking. Also theSTOP/CLEAR pad isused to activate ovendoor lockout setting.*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and duringpreheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperatu re. When thepreheat indicator light turns OFF, y0ur 0yen is ready.For a silent control panelWhen choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed forsilent operation. Press and hold _b After 7 seconds, the control will beep once. This will block the controls fromsounding when a pad is pressed. To return the sound, press and hold _b again for 7 seconds until the control beepsonce,Note: The control will return to the audible mode after a power outage.Temperature conversionThe electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmedfor any temperature from 170°F to 550°F (77°C to 287°C).To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):1. Press _,o" "----" appears in the display.2. Press and hold the A until "HI" appears in the display./-_ oc3. Press and hold B,o,until °F or appears in the display.4. Press the A or V to change °F to °C or °C to °F.5. Press any control pad to return to normal operating mode.12