Kenmore 665.15924 Use & Care Manual

Also see for 665.15922: Use & care guide

Contents

Kenmore 665.15924 Use & Care Manual Manual pdf 9 page image

CupFolddown the extrashelf on the left or right side of the top rackto hold additionalcups, stemwareor long itemssuch as utensilsand spatulas,Adjustable 2-position top rackYou can raise or lower the top rack to fit tall items in either the topor bottom rack. Raise the top rack to accomedate items up to9 in (23 cm) in the top rack and 13 in (33 cm) in the bottom rack,or lower the top rack to accomedate items up to 11 in (28 cm) inboth the top and bottom racks• Adjusters are located on eachside of the top rack.Flexible tinesThe row of tines on the left and rightsidesof the top rack can beadjustedto make room for a varietyof dishes.To adjust the Flexible tines1. Grasp the tip of the tine that is in the tine holder.2. Gently push the tine out of the holder.3. Lay the tines down, toward the center of the rack.No-flip clipsThe no-flip clips hold lightweight p_estic items like cups, lids, orbowls in place during washing.To raise the top rackLift the rack on either, or both, sides until the rack is level.NOTE: The top rack adjusters MUST be level.To lower the top rackPress both rack adjusters and slide the rack back to itsoriginal position•Loading the Bottom RackThe bottom rack is designed for plates, pans, casseroles, andutensils. Many items, up to 13 in (33 cm), tall fit in the bottomrack. (See recommended loading patterns shown.)NOTE: The features on your dishwasher rack may vary from thedrawings shown.To move a clip1. Pull the clip up and off the tine.2. Reposition the clip on another tine.10 place setting• Do not load glasses, cups, or plas(!_ items in the bottomrack. Load small items in the bottom rack only if they aresecured in place.• Load plates, soup bowls, etc., between tines•Ovedap the edges of plates for large loads.9