Kenmore 665.1378 Use And Care Manual

Contents

Kenmore 665.1378 Use And Care Manual Manual pdf 11 page image

113. Move the tines to the left to make room for larger dishes.Move the tines to the right to wedge plastic or otherlightweight items against the side of the rack.No-flip clipsThe no-flip clips hold lightweight plastic items such as cups, lids,or bowls in place during washing.To move a clip1. Pull the clip up and off the tine.2. Reposition the clip on another tine.Loading Bottom RackThe bottom rack is designed for plates, pans, casseroles, andutensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.(See recommended loading patterns shown.)NOTE: The features on your dishwasher rack may vary from thedrawings shown. Do not load glasses, cups, or lightweight plastic items in thebottom rack. Load small items in the bottom rack only if theyare secured in place. Load plates, soup bowls, etc., between tines. Overlap the edges of plates for large loads. Load soup, cereal, and serving bowls in the rack in a varietyof ways depending upon their size and shape. Load bowlssecurely between the rows of tines. Do not nest bowlsbecause the spray will not reach all surfaces. Load cookie sheets, cake pans, and other large items at thesides and back. Loading such items in front can keep thewater spray from reaching the detergent dispenser. Secure heavily soiled cookware face down in the rack. Ifusing TURBO Z ONE ™ wash option, load cookware inTURBO Z ONE ™ wash area. (See “TURBO Z ONE ™ wash area.”) Make sure pot handles and other items do not stop rotationof the spray arm(s). The spray arm(s) must move freely. Do not load items between the bottom rack and the side ofthe dishwasher tub because they might block the water inletopening.TURBOZONE™ wash areaThe TURBO ZONE ™ wash area is located at the back of the lowerdishrack.NOTE: You must select the TURBO Z ONE™ wash option to utilizethis wash feature. Do not face items toward the rear of the unit ifyou are not using this wash option. Load pans, casserole dishes, etc. in the back of the lowerdishrack with the soiled surfaces facing the T URBO Z ONE™spray jets. Make sure items do not interfere with the waterfeed tube, spray arms, or T URBOZONE ™ spray jets. Tip items toward the rear of the unit between the back tworows of tines to maximize coverage.IMPORTANT: Only one row of items may face theTURBO Z ONE ™ spray jets. Load items so they do not interferewith the rotation of the T URBO Z ONE ™ spray jets. Stacking,overlapping, or nesting items will keep the TURBO Z ONE™spray jets from reaching all of the surfaces.10 place setting12 place settingT URBOZ ONE ™ wash areaT URBO Z ONE™ wash area side view