12 Timer operationTimer operationON/OFFMODEFANTEMPSLEEP SWING DIRECTLED FOLLOW METURBO SELF CLEANTIMEROFFTIMERONSILENCEFPPress the TIMER ON button can set the auto-on time of the unit.Press the TIMER OFF button can set the auto-off time of the unit.To set the Auto-ON time1. Press the TIMER ON button. The remote controller showsTIMER ON, the last Auto-on setting time and the signal "H"will be shown on the LCD display area. Now it is ready to resetthe Auto-on time to START the operation.2. Push the TIMER ON button again to set desired Auto-on time.Each time you press the button, the time increases by half anhour between 0 and 10 hours and by one hour between 10 and24 hours.3. After setting the TIMER ON ,there will be a one second delaybefore the remote controller transmits the signal to the airconditioner. Then, after approximately another 2 seconds,the signal "H" will disappear and the set temperature willre-appear on the LCD display window.To set the Auto-OFF time1. Press the TIMER OFF button. The remote controller showsTIMER OFF, the last Auto-off setting time and the signal "H"will be shown on the LCD display area. Now it is ready to resetthe Auto-off time to stop the operation.2. Push the TIMER OFF button again to set desired Auto-off time.Each time you press the button, the time increases by half anhour between 0 and 10 hours and by one hour between 10 and24 hours.3. After setting the TIMER OFF, there will be a one second delaybefore the remote controller transmits the signal to the airconditioner. Then, after approximately another 2 seconds, thesignal "H " will disappear and the set temperature willreappear on the LCD display window.WARNINGcaution• When you select the timer operation, the remote controllerautomatically transmits the timer signal to the indoor unit forthe specified time. Therefore, keep the remote controller ina location where it can transmit the signal to the indoor unitproperly.• Timer setting is in half hourly intervals up to 10 hours thenhourly intervals to 24 hours12