14KSL-H AND KSL-Z by KEELERwww.ke e l e r. c o . u kDIGITAL SYSTEM CAMERACamera Resolution 2048 x 1536Pixel Class: 3 MPixelSensor size: 1/1.8"Sensor Technology: CMOS COLORPC Specification Medically approved PCCPU: Intel Core 2 Duo 2.33GHz 15 or higherMemory: 4Gb RAM or higherUSB port: 3.0 or higherHard disk speed 5200 rpm or higherOperating system: Microsoft Windows XP Service pack 3 orhigher,Windows 7/8 32-Bit or 64 BitSoftware requirements CE compliant or FDA cleared camera imaging softwareWEIGHT, PACKED (APPROX.)Digital Slit Lamp complete 20.0Kg, 75 x 54 x 45cm W x D x HPROTECTION AGAINST INGRESS IPxOCLASS II ME EQUIPMENTInsulation between mains parts and the functional earth provide at least two means of protection.POWER SUPPLY Part numberPower supply unit Switch Mode, (100V-240V input) +/- 10% multi plugcompliant to EN60601-1 EN 61000-6-2, EN 61000-6-33020-P-5020/3020-P-7033Power supply output 24V DC: 2.2 amps must be IEC/EN 60601 compliantComplies with Electrical Safety (Medical) BS EN 60601-1Electromagnetic compatibility EN 60601-1-2Ophthalmic instruments - Fundamental requirementsand test methods ISO 15004-1Ophthalmic instruments - Optical radiation hazard ISO 15004-2If the Digital camera Assembly is used with power supplies or cables other than those supplied,this may result in increased emissions or decreased immunity of the Digital Camera Assembly inrelation to EMC performance.It should be noted that neither the power supply nor the cables provided with the Digital CameraAssembly should be used on other equipment. To do so may result in increased emissions ordecreased immunity of the other equipment in relation to EMC performance.ENVIRONMENTALTemperature Humidity PressureUse +10°C to +35°C 30% to 90% 800 hpa to 1060 hpaStorage -10°C to +55°C 10% to 95% 700 hpa to 1060 hpaTransport -10°C to +60°C 10% to 95% 500 hpa to 1060 hpa12 TECHNICAL SPECIFICATION