KeContactP30 x-seriesCharging StationConfiguration manual V 4.18Translation of the original instructions

Keba KeContact x Series Configuration Manual

Introduction

Requirements

Further documentation

Safety notes

Description of the charging station

Type plate

Options

Displays and operating elements

Display (optional)

Authorization

Authorization via key switch

Charging process

Error diagnosis

Maintenance

KeContact P30

Important information

Intended use

Product description

Variant overview

Installation guidelines

Specifications for the electrical connection

Differing Z.E.-Ready / E.V. Ready requirements

Space requirements

Installation

Installation requirements

Preparing the housing

Removing the connector panel cover

Cable insertion from above - surface cable routing

Mounting the charging station

Electrical connection

Connecting the power supply line

Enable input [X1] (excluding e-series)

Switch contact output [X2] (excluding e-series)

Terminals [X1/X2] (excluding e-series)

Ethernet1 connection [ETH] (optional)

DIP switch settings

Commissioning

Safety checks

Mounting the connector panel cover

Mounting the housing cover

Additional technical instructions

Dimensions

Technical data

CE Declaration of Conformity

Index

Wichtige Informationen

Produkthinweise

Sicherheitshinweise

Bestimmungsgemäßer Gebrauch

Benutzung der Stromladestation

Status LED

Display

Störungsbehebung

Wartung

important information

product information

safety instructions

intended use

troubleshooting

informations importantes

indicaciones de seguridad

uso conforme a lo previsto

usuwanie usterek

Übersicht

Autorisierungsverfahren

RFID Karten programmieren (optional)

Zylinderschloss einbauen/ausbauen (optional)

Overview

Authorization process

Programming RFID cards (optional)

Installing/removing the cylinder lock (optional)

Representation of safety instructions

UDP interface: Guidelines

Recommended communication buildup scheme

P30 x-series

Current control

UDP commands

UDP commands intended for regular use

UDP command: report 2

UDP command: report 3

UDP command: report 1xx (historical log entries)

UDP command: currtime

UDP command: setenergy

UDP command: start

UDP command: stop

UDP command: setdatetime

UDP command: display

UDP commands with permanent effects

UDP command: curr

UDP command: failsafe

UDP status messages

Notes on this document

Frequently asked questions (FAQ)

Energy display (c and x series)

RFID (teaching)

Software update

Log file

Network and communication (x-series)

WLAN

Master/Slave

Router/Switch

Assistance in case of problems

Blue/Red error displays

Red/White error displays

Diagnostic options

KeContact X Series

Keba KeContact x Series Configuration Manual

Product

Learn More

Legal