Menu
Kaye C4C User Manual
    |
C4 and C4C KAYE CORNER CHAIRS(effective 2/26/03)These are the user instructions for the C4 andC4C Kaye Corner Chairs. All persons who set-up oradjust the unit should first read these entireinstructions. Please store these instructions for futurereference.USEThe Kaye Corner Chairs are designed forchildren who need support of the head, trunk, andpelvis in order to develop an upright sitting postureand to align the head and trunk.SIZES AND MODELSThe corner chairs come in two sizes: thesmaller C4 and larger C5.Optional casters can be added to both the C4and C5. With casters, the C4 becomes a C4C, andthe C5 becomes a C5C.CORNER CHAIR IDENTIFICATION, AND SIZEAND WEIGHT LIMITSThe model number is located on the warninglabel.The C4 or C4C is appropriate for users from 8months to 4 years old, up to 39 inches or 99centimeters tall, or who weigh up to 40 pounds or 18kilograms.BOX CONTENTSThe following should be included in theshipping box:1 ea. Chair Assembly;2 ea. Head Cushions; and1 ea. Tray Assembly.If you ordered the chair with optional casters,the following should be included in the inner box:4 ea. Casters;16 ea. Bolts; and16 ea. Lock Washers.CASTER ATTACHMENT AND USEAttach, lock, and unlock the optional castersas follows:1. Place a lock washer on each of the 16 bolts.2. Turn the corner chair on its side so that you haveaccess to the underside of the base.3. Align the holes in each caster plate with the holesin each corner of the base.4. Secure each caster in place with four of the boltsand washers, and securely tighten the bolts.5. To lock the casters so that they will not roll, stepon the metal brake that protrudes from each caster.Once this brake is rotated fully downward, it willprevent the wheel from rolling.6. To unlock the casters, rotate the brakes upward.7. The casters should be locked whenever thechair is not being intentionally moved.HEAD CUSHION ATTACHMENT ANDADJUSTMENTPosition the head cushions to help keep theuser’s head aligned.On the back of each chair side, there are twoblack knobs near the top edge. Use these knobs tosecure the head cushions in place as follows:1. Remove the knobs and washers to expose theprotruding bolts.2. Install each head cushion assembly so that thetwo bolts protrude through the slot in that assembly.As you install the assembly, orient the cushiontowards the chair seat.3. Reinstall a washer and black knob onto each bolt.4. Tighten the knobs.5. To adjust the height of the head cushion, loosenthe knobs, reposition the cushion, and re-tighten theknobs.TRAY INSTALLATIONInstall the tray assembly as follows:1. On the outside of each tray side is a block with abarrel bolt. To install the tray, rotate the barrel boltlatches upward and then outward so that the barrelbolts point towards the outside of the tray.2. On the inside of the tray sides there are a fewsmall, wooden blocks. Position the tray assembly onthe front of the chair so that a set of these blocks |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved