Kathrein UFS 712si Operating Manual

Also see for UFS 712si: Notice d'utilisation

Contents

Kathrein UFS 712si Operating Manual Manual pdf 10 page image

10CONNECTION AND SET-UPConnect the satellite receiver (TV Scart socket) to the TV set using a Scart cable (see “Connectionexample”). If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.Use a further Scart cable to connect the satellite receiver (VCR/Scart socket) to the video recorder/PVR.For system reasons, the same video signals are to be found at the TV Scart socket as at the video cinchoutput.If you want to play the sound on your hi-fi system, connect the audio cinch sockets to the input socketson the hi-fi system, using an appropriate cable (see “Connection Example”).The fibre-optic output and the electrical digital output are intended for the connection of a Dolby Digitalsystem (see “Connection Example”).Remove the cover on the rear of the remote control.Insert the two supplied batteries into the remote control. Ensure correct polarity of the batteries;the + and – markings are indicated inside the battery compartment.Slide the cover back into the housing until it locks in place.TV AND VIDEO RECORDER CONNECTIONAUDIO CONNECTIONOPTICAL/ELECTRICAL DIGITAL OUTPUTINSERTING BATTERIES INTO THE REMOTE CONTROLIf you are recording using an external video recorder, remember not to operate thereceiver during recording, otherwise all the on-screen displays will appear on yourrecording.