Kathrein UFD 515 Operating Manual

Also see for UFD 515: Mode d'emploi Operating manual Mode d'emploi

Contents

Kathrein UFD 515 Operating Manual Manual pdf 53 page image

Setting system parametersWith or , return to the submenu system parameters.Local time/TimerThe receiver displays the UTC time transmitted with the data stream(United Time Coordinate, former Greenwich Mean Time). Therefore,in Germany, the time must be corrected by +1 hour.A correction of the summer time is possibly required in order for thetimers to turn on and off at correct times.You can make this correction yourself using the numerical buttons.Move the cursor bar with the button to the entry ‘Localtime/Timer.’ The first digit in the time entry is shadowed. You can nowcorrect date and time with the numerical buttons. After each entry, thecursor jumps to the next position. Press the two times to end theentry. The receiver saves the new setting.Afterwards, do not switch off the receiver with the mains switch butrather with the remote control, otherwise the settings will be lost.TV typeUse the buttons to specify whether your TV set is aPAL,Multi-standard orNTSC unitConfirm by pressing two times.Picture formatUse the buttons to select the type of picture format, either4 : 3 format or16 :9 format.AutoConfirm by pressing two times.ScreenUse the buttons to select the type of screen display:conventional (P/S) = standard representation for 4:3 units orwide screen picture (letter box display off) - in this settings, the widescreen is required for the 16:9 unit.Confirm by pressing two times.53