21the tires pressure specified on the tire walls to maintain the tires atthe correct pressure. Do not let anyone touch the wheels when thewheelchair is in motion to avoid pinch injury.5.3 How to Adjust Your Wheelchair5.3.1 Swing-Away and Detach FootrestTo swing away and detach the footrests, pull the swing-away lever(See Figure 5-7), then you can swing away and/or detach thefootrests. (Figure 5-8) It can make transferring in and out of thewheelchair easier. Blazer series can also be mounted with other typesof KARMA footrests.Figure 5-7 Figure 5-8 Figure 5-9 Figure 5-105.3.2 Footrest Adjustment in Longitudinal (Fore/Aft) PositionPlease use the #5 Allen Key Wrench included in your KARMA Tool Kit(Figure 5-9) to make this adjustment. Remove the screws under the seat(Figure 5-10) then adjust the footrest to accommodate the user's legposition and flexibility (Figure 5-11). Re-tighten the screws.Figure 5-11 Figure 5-125.3.3 Footplates AdjustmentThe footplate length should be adjusted according to the user's calflength. Go to your service provider for adjustment or follow belowinstructions:5.3.3.1 Use the #5 Allen Key Wrench from KARMA Tool Kit to loosen the bolt