Kantronics KAM Operation Manual

Also see for KAM: Manual Command manual Instruction manual Installation manual

Kantronics KAM Operation Manual Manual pdf 47 page image

RTTY / ASCII43Once you have entered either the RTTY or ASCII Mode, the shift may be changed by using theCtrl-C S directive. This will sequentially step through the available shifts – 170, 425, 850 and MO-DEM. Initially, the KAM will enter the RTTY or ASCII Mode using the shift set in the SHIFT com-mand. Pressing the Ctrl-C S directive would change the shift and display a message showing thenew shift:-425 SHIFT-Summary of RTTY/ASCII DirectivesCtrl-L Send LETTERS shift characterCtrl-N Send FIGURES shift characterCtrl-C S Change shift (170, 425, 850 or MODEM)Ctrl-C I Toggle invert mark and space signals received from radioCtrl-C T Enter transmit modeCtrl-C E Enter receive mode when transmit buffer is emptyCtrl-C R Enter receive mode immediatelyCtrl-C X Leave current mode and return to cmd: prompt (packet)Ctrl-Cn wheren is a number (0–9) Changes current baud rate according to the followingchart:n BAUD RATE WPM1 45 602 50 673 57 754 75 1005 100 1326 110 1477 150 2008 200 2679 300 400Ø rbaud/ascbaud