Kane 255 Manual

Kane 255 Manual Manual pdf 11 page image

Page 11Printing DataPress the SEND/PRINT button for 1 second to start the data transfer fromthe analyser to the infa-red printer. The analyser displays a series of barsuntil the transfer is completed. Press the button for 1 second again toabort the transfer.Make sure the printer is switched on, ready to accept data and the infa-red receiver is inline with the emitter of the analyser (on top of theanalyser).Storing DataPress and hold the SEND/PRINT button for approximately 2 seconds.The top line of the display briefly displays the log number.Note: The store function is inhibited in normal operation if the pump isswitched off.7. USING / / BUTTONSThe function buttons with the symbols / / below areused to navigate through the menu when the rotary dial is in the menuposition.