49GBEvery 1200 hours of work the electronic board sends a warning signal and the display will show“SERVICE”. This indicates the need for a thorough cleaning of the stove by a CAT. The lack of suchcleaning could result in failure of the stove and poor combustion, thereby resulting in a lower yield.Maintenance and cleaningParts Everyday Every 2-3daysEveryweekEvery 15daysEvery 30daysEvery 60-90 daysEvery year /1200-1400 hBrazier ◊Cleaning ash collection compartment ◊Cleaning ash tray ◊Cleaning the door and glass ◊Cleaning the interior heat exchanger /smoke fan compartment •Cleaning complete exchanger •Clean "T" to exhaust •Flue •Door gasket ash •Internal parts •Flue pipe •Electromechanical components •All cleaning of all parts must be carried out with the stove completely cold and unplugged toavoid burns and thermal shock. The stove does not need much maintenance if used with certifiedquality pellet. The need for maintenance varies depending on the conditions of use (switching onand off repeatedly) and depending on the performance required.◊ by the user• by the authorised qualified technical assistance