Menu
Kaisai RG51QBGCE Manual
              | |
9Timer operationpress the TIMER ON button can set the auto-ontime of the unit. And press the TIMER OFF buttoncan set the auto-off time of the unit.1. Press the TIMER ON button. The remotecontroller shows TIMER ON, the last Auto-onsetting time and the signal "h" will be shown onthe LCD display area. Now it is ready to reset theAuto-on time to START the operation.2. Push the TIMER ON button again to set desiredAuto-on time. Each time you press the button,the time increases in 30 minutes increments, upto 10 hours, then at 1 hour increments up to 24hours.3. After setting the TIMER ON ,there will be a one-half second delay before the remote controllertransmits the signal to the air conditioner. Then,after approximately another 2 seconds, thesignal "h" will disappear and the set temperaturewill re-appear on the LCD display window.To set the Auto-on time.To set the Auto-off time.1. Press the TIMER OFF button. The remotecontroller shows TIMER OFF, the last Auto-offsetting time and the signal "h" will be shown onthe LCD display area. Now it is ready toreset the Auto-off time to START the operation.2. Push the TIMER OFF button again to set desiredAuto-off time. Each time you press the button,the time increases in 30 minutes increments, upto 10 hours, then at 1 hour increments up to 24hours.3. After setting the TIMER OFF ,there will be a one-half second delay before the remote controllertransmits the signal to the air conditioner. Then,after approximately another 2 seconds, thesignal "h" will disappear and the set temperaturewill re-appear on the LCD display window.ADJUSTAUTOCOOLDRYHEATFANHIGHMEDLOWMODESWINGFAN SPEEDDIRECTION/SWING TIMER ONECOON/OFFTIMER OFFRESET LOCK21SET TEMPERATURE( C)10 kaisai.com |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved