Menu
KaiCong SIP1016 User Manual
                                            | |
Contents
| 
Kaicong-Nothing important than safety!Anything else ,please contanct me. 16Note2: Before you do the configuration of wireless as shown above; please make surethe device is connected to the network via network cable. After settings succeed,please unplug the cable and reboot the device, and then wireless function takeseffect.4.4.3 UPnP SettingIf you enable UPNP, once the IP camera is connected into the LAN, it will connect to therouter in the LAN to do the port-forwarding automatically.Below Figure 19, tick “Using UPNP to Map Port” and the setting are completed. It willshow the setting is successful or not.Figure 19 UPnP settingsBefore using UPNP function, please make sure the router’s UPNP function has beentriggered. Not all the routers support UPNP perfectly. Please test if the router works wellwith the equipment, if not, we would suggest you to disable this function and do theport-forwarding manually.4.4.4 DDNS SettingPlease refer to the content |
Related manuals for KaiCong SIP1016
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved