KEPCO ®THE POWER SUPPLIER™MODELOPERATOR’S MANUALORDER NO.KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102email: hq@kepcopower.com World Wide Web: http://www.kepcopower.comKEPCO INC.An ISO 9001 Company.BOP-GL 1KWHIGH POWER BIPOLAR POWER SUPPLYOPTIMIZED FOR INDUCTIVE LOADS(LOW NOISE, RIPPLE, DRIFT AND TEMPERATURE COEFFICIENT)BOP-GL 1KWPOWER SUPPLY©2015, KEPCO, INCP/N 243-1293-yIMPORTANT NOTES:1) This manual is valid for the following Firmware Versions:FIRMWARE VERSION NOTE.2) A Change Page may be included at the end of the manual. All applicable changes andrevision number changes are documented with reference to the equipment serial num-bers. Before using this Instruction Manual, check your equipment firmware version num-ber to identify your model. If in doubt, contact your nearest Kepco Representative, or theKepco Documentation Office in New York, (718) 461-7000, requesting the correct revisionfor your particular model and firmware version number.3) The contents of this manual are protected by copyright. Reproduction of any part can bemade only with the specific written permission of Kepco, Inc.Data subject to change without notice.3.05 and higher
