Menu
KENT 11063 Instruction Handbook Manual
        | |
• Now connect the second flexible pipe to output side of softener and connect itsanother end to your washing machine, using appropriate fittings.• Connect the white pipe for drain on the upper side of output and modify lengthaccording to the distance of the drain water outlet.• The installation of water softener is complete.• The water softener is ready for use.Note: To regenerate softener, follow the procedure as explained under‘Regeneration & Maintenance’.OperationFor day-to-day usage, keep both the inlet as well as the outlet water valves in thevertical position (facing upwards) as shown in the figure.Regeneration & Maintenancea. Regeneration• If hardness of water increases, it is time for regeneration.• Usually regeneration is to be done after 300-400 liters of water usage(based on the input hardness of water).Regeneration ProcessBased on the hardness of the water periodic regeneration is required foroptimal usage.To Regenerate• Before starting regeneration ensure that the salt chamber is filled with waterand has atleast 250 grams of salt dissolved.• Please repeat the process if the hardness of water is still high even afterthe first regeneration.• To start regeneration, rotate the inlet water valve and outlet water valve inanti-clockwise and clockwise direction respectively. Both should be in verticalposition (facing downwards).• Wait for 15 minutes allowing the contents to pass through from brine chamber tothe lower housing. In 4-5 minutes the brine chamber/salt tank will be empty.Thereafter for the next 10 minutes the salt will react with resin in the lower resinhousing for regeneration.• Now rotate the inlet water valve clockwise to bring it back to the original position(facing upwards) and allow water to pass for 5 minutes.• After 5 minutes, rotate the outlet valve anti-clockwise and bring it back to itsoriginal position (facing upwards). During this time, the regenerated water wouldbe drained out through outlet pipe (1/4”).BrineIN OUTOutletValveInletValveToDrainChamberIN OUTOutletValveInletValveToDrainBrineChamberIN OUTOutletValveInletValveBrineChamberToDrainIN OUTOutletValveInletValveToDrainBrineChamber5 6 |
Related manuals for KENT 11063
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved