Menu
KAUKO XI-M User Manual
              | |
6 / 14Connection of peripheral devicesRead the operating instructions of the devices to be connected very carefully and follow theinstallation instructions of the respective products. The cable lengths of the devices must notexceed 3 meters, otherwise correct operation cannot be guaranteed. Make sure that connectorsare sealed properly.Warning: With devices that provide the Kauko Xi-M with additional power via the connecting plug,the supply must also be tested and certified according to EN60601-1.Upgrade and installation of componentsRemove the mains supply before opening the housing!Any opening of the housing is permitted only by one of Kauko’s authorized service partners andauthorized technicians. According to applicable legal requirements, after opening the Kauko Xi-M,a new safety test must be carried out in accordance with EN60601-1. If you open a Kauko Xi-Munit, you must make a new safety test in accordance with EN60950.Before opening the housing, it is mandatory to remove the mains supply plug, all communicationlines and to wait approx. 2 minutes until the electrical charge inside the unit has completelydischarged. Otherwise, there is the potential for a serious safety hazard! Any change ormodification to the configuration of the unit requires authorization from Kauko’s support personnel,and only components that have been tested and validated by Kauko may be used. Anunauthorized change to the unit’s configuration will result in an immediate loss of conformity andcan endanger the health of the user and/or the patients and other people, as electrical safety canno longer be guaranteed!Ingress of foreign objects and liquidsWith any unintended intrusion of foreign objects or liquids or in the event of condensation on theunit, it must immediately be separated from external power sources by removing the mains plugand communication lines. Under no circumstances should the unit be switched on again; instead,contact your authorized Kauko dealer or Kauko support team.Adherence to physical limit valuesIn accordance with the technical data, maintain the specified permissible operating values fortemperature, humidity and air pressure with no exceptions, as the Kauko Xi-M computer wouldotherwise run outside its specifications, and safe operation can no longer be guaranteed. If thecomputer is used outside its specified usage limits, the unit must be immediately switched off andthe mains supply plug removed.Temperature fluctuations and condensationIf the unit is exposed to large temperature fluctuations, such as those that can occur intransportation or storage in an unheated location, under no circumstances should the computer beconnected straight away, as condensation moisture can accumulate internally. Wipe off visible |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved