Menu
KATA AB-301 Quick Start Manual
  |
AB-301 DimensionsMinimum girth 86 cm 33.9”Maximum girth 160 cm 63”Width 9.5 cm 3.75”Weight 0.28 kg 0.62 lbs.Name: AB-301 Order code: KT AB-301AB-302 DimensionsMinimum girth 86 cm 33.9”Maximum girth 160 cm 63”Width 9.5 cm 3.75”Weight 0.28 kg 0.62 lbs.Name: AB-302 Order code: KT AB-302Protective Carrying Technologywww.kata-bags.comAUXILIARY POUCH SYSTEMBELT AND HARNESSThe Auxiliary Pouch System will allow you to comfortably store and easily access allyour lenses, flash and camera bodies. This modular system lets you carry as manyor as little pouches either on the belt or with the added harness for extra support.You can connect up to 6 pouches recommended anywhere on your belt for variouscarrying possibilities. Pouches for full size DSLR bodies, professional flash, and manydifferent sizes of lenses are available for purchase separately to match your kit.Features:• Signature TST protection protects your gear within the pouches.• Adjustable belt and harness for ultimate comfort.• Padded removable insert for most pouches for extra protection and spacewhen needed.• Overlapping belt closure for securing on belt.• Exterior and interior pockets for storing lens caps, filters and otheraccessories.The Auxiliary Pouch System gives you the option to eitherpurchase the AB-302 full harness which includes both thebelt as well as the shoulder harness, or to purchase theAB-301 belt to be used individually.To properly adjust the belt:1. Start by quickly trying on the belt and buckling. Youmay find that you need to lengthen or shorten.2. If no adjustment is needed, simply clip the main frontbuckle and tighten by pulling the ends of the strap toyour sides. (see fig. 1)3. To adjust the length of the belt, take the belt off andopen each end of the inside of the belt. You can nowadjust each end using the hook and loop to match yourneeded waist size. Widening the belt will reveal an extrapouch connection,( provided you are able to wear the beltwide comfortably). (see fig. 2)4. Close the inside large hook and loop connection onthe inside of the belt.To properly adjust and install the shoulder harness:5. Follow the steps above first to adjust the belt.6. The harness has an adjustable rear connection aswell as two frontal connections with 2 different buckleoptions.7. Put on the belt and shoulder harness, making surethat the rear connection is attached and the two frontalconnections are attached with the corresponding buckle,either with the two front or the two D-rings.If the height of the harness needs adjustment, take offand adjust the back hook and loop connection to thedesired length. (see fig. 3)8. Put the harness back on. You can clip the front twoattachment buckles to either the inside or outside D-ringsaccording to your comfort. (see fig. 4)9. Pull the excess straps of the shoulder harness to tightencomfortably on your body. (see fig.5)*Dimensions measures belt only on eachAB-301 Belt with Pouchesfig. 3.fig. 1fig. 4fig. 2fig. 5AB-302 Full harness withpouches |
Related manuals for KATA AB-301
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved