KAS S1 How To Set Up

KAS S1 How To Set Up Manual pdf 1 page image

How to Setup KAS S1 GatewaySTEP 1 - Download LockKeeper App:Android – Scan QR code iOS – Scan QR codeSTEP 2 - Setup and Configure Gateway:Scan QR to view latest online guidesThere are two ways to setup the S1 Gateway. Please follow the instructions relevant to your wiringrequirements.Note: You only need to follow one method.PoE Option: (LAN + Power Over Ethernet) WIFI Option: (DC Plug + WIFI)Step 1: Power upPlug the LAN cable into the base of the gateway as pictured.Step 1: Power upPlug the PC Plug into the base of the gateway as pictured.Step 2: Activate with AppYou will see a solid RED LED to notify you that the gateway ispowered and in config mode.• Login to LockKeeper and go to the Setup Tab.• Click the Gateway factory number to activate it.• For example GWS00163Step 2: Activate with AppYou will see a solid RED LED to notify you that the gateway ispowered and in config mode.Login to LockKeeper and go to the Setup Tab.Click the Gateway factory number to activate it.For example GWS00163Step 3: No action necessaryThe gateway will automatically assign a dynamic IP address andconnect to the network.Note: The LAN network must be DHCP enabled.Step 3: Configure WIFI networkEnter your WIFI network SSID parameters and click config.

/ 2

This manual is suitable for:

KAS S1 How To Set Up

Product

Learn More

Legal