Kärcher NT 35/1 Tact User Manual

Also see for NT 35/1 Tact Te: Original instructions User guide Manual

Contents

dry vacuum cleaning

Kärcher NT 35/1 Tact User Manual Manual pdf 6 page image

- 27 Air inlet, motor cooling air8 Dirt receptacle9 Steering roller10 Suction head11 Suction support12 Floor nozzle13 Suction pipe14 Carrying handle15 Filter cover16 Bender17 Rotary switch for suction output (min-max)18 Indicator lamp19 Socket20 Automatic filter dedusting21 Main switch22 Flat fold filter23 Filter dedusting24 Floor nozzle holder25 Holder for floor nozzle26 Holder for suction pipes27 Power cord28 NameplateTact Te only:Static charge is deflected by providingearthing to the connection nozzles. Thisprevents the formation of sparks and cur-rent shocks due to attachments (option)with electrical conductivity.CautionThe flat pleated filter must must always bein place while vacuuming.– When vacuuming fine dust, you mayalso use an additional paper filter bag ora membrane filter (special accessory).Illustration Release and remove the suction head. Insert the paper filter bag or the mem-brane filter (special attachment). Insert and lock the suction head.Illustration Remove the brush strips. Install the rubber lips.Note: The structured side of the rubber lipsmust point outwards.– If the appliance is used to vacuum wetdirt the paper filter bag or the mem-brane filter (special accessory) must al-ways be removed.– It is recommended to use a special filterbag (wet) (see Filter systems).CautionThe flat pleated filter must must always bein place while vacuuming.– If wet dirt is vacuumed with the uphol-stery or crevice nozzle, or if water issucked up from a container, it is recom-mended to deactivate the "automatic fil-ter cleaning" function.– If the maximum liquid level is reachedthe appliance will turn off automatically.– In case of non-conductive liquids(such as emulsion drilling fluids,oils, and greases) the appliance isnot turned off when the container isfull. The filling level must be continu-ously monitored and the containermust be emptied in time.– After having completed the wet vacuumoperation clean the flat pleated filter,the electrodes and the container and letdry.IllustrationThe suction hose is equipped with a clipsystem. All C-35/C-DN-35 accessories canbe connected.Start upAnti-static systemDry vacuum cleaningInserting the paper filter bagWet vacuum cleaningInserting the rubber lipsRemove the paper filter bagGeneralClip connection13EN