Kärcher MV 3 Premium Operating Instructions Manual

Also see for MV 3: Operating instructions

Contents

Kärcher MV 3 Premium Operating Instructions Manual Manual pdf 9 page image

English 9Recommendation: In order to vacu-um the floor, attach the handle to thesuction hose.See position 12.Illustration Put both suction pipes together andconnect them with the handle. For edges, joints, heaters and hardto reach locations.IllustrationFor appliances with only one insert: Note: For vacuuming dry dirt or wa-ter off the floor - always work withthe insert (brush strip and rubberlip) in the floor nozzle.For appliances with two inserts: When vacuuming dry dirt off thefloor, clip an insert with two brushstrips into the floor nozzle. When vacuuming water off thefloor, clip an insert with two rubberlips into the floor nozzle.Illustration To connect the suction hose with anelectric tool Adapt the adapter to the connectiondiameter of the electric tool using aknife if necessary.CautionAlways work with an insertedcartridge filter during wet as wellas dry vacuum cleaning!Illustration Mount loose parts delivered withappliance prior to start-up.Illustration Connect accessories.Illustration Plug in the main plug.Illustration Turn on the machine.CautionCheck the filter for damage priorto installation and replace asnecessary.Work with a dry cartridge filteronly!CautionVacuum cold ashes only whenusing a pre-filter.Order no. basic design: 2.863-139.0,premium design: 2.863-161.0.Suction tubes 2 x 0.5 mCrevice nozzleFloor nozzle(with inserts)AdapterOperationBefore StartupStart upDry vacuum cleaning