HDS Middle Range / HDS Premium Range Basic Settings and Service ProceduresService Manual 04.2008 Page 85 / 1273.2.1 Adjusting the stopping behaviourShut-off after 30 min continuous operation isactivated.Display NoteExplanation30 °CShut-off after 30 min continuous operation is notactivated (manufacture settings). Switchover with SET3.2.2 Adjusting the leakage behaviourShut-off after 10 short start-ups activated(manufacture settings).Display NoteExplanation40 °CMenu access:Select 45°C.Switch off unit. Hold SET.Switch on unit. Release SET.Select with SET setting.Shut-off after 10 short start-ups is not activated. Switchover with SETShut-off after 30 min continuous pause is activated. Switchover with SET35 °CShut-off after 30 min continuous pause is notactivated (manufacture settings). Switchover with SETSwitchover with SET3.2.3 RFID queryUnit is equipped with RFID.Display NoteExplanation45 °C+„SET“Unit is not equipped with RFID.Switchover with SETMenu access:Select 45°C.Switch off unit. Hold SET.Switch on unit. Release SET.Select with SET setting.