Kärcher HDS 801 D Instructions Manual

Also see for HDS 801 D: User manual Instruction manual Manual

Contents

Kärcher HDS 801 D Instructions Manual Manual pdf 18 page image

– 3 DangerRisk of injury! Follow the respective safetyregulations when operating at gas stationsor other dangerous areas. Danger– Do not use high pressure cleanerswhen there has been an oil spill; movethe appliance to another spot and avoidany sort of spark formation.– Do not store, spill or use fuel in the vi-cinity of open flames or appliances suchas ovens, boilers, water heaters, etc.that have an ignition flame or can gen-erate sparks.– Keep even mildly inflammable objectsand materials away from the silencer (atleast 2 m).– Do not start the engine without the si-lencer; check, clean and replace, if re-quired, the silencer at regular intervals.– Do not use the engine in forest, bushesor grassy areas without fitting a sparkreceiver at the exhaust.– Except for setting jobs, do not run theengine when the air filter is removed orthere is no cover over the suction sup-port.– Do not make any adjustments to theregulator springs, regulator bars or oth-er parts that can bring forth an increasein the engine speed.– Risk of burns! Do not touch hot silenc-ers, cylinders or radiator ribs.– Do not put hands or feet close to mov-ing or rotating parts.– Risk of poisoning! The appliance shouldnot be operated in closed rooms.– Never leave the machine unattended solong as it is running.– Please follow the national rules andregulations for fuel spray jets of the re-spective country.– Please follow the national rules andregulations for accident prevention ofthe respective country. Fuel spray jetsmust be tested regularly and the resultsof these tests must be documented inwriting.– The heating appliance of the machine isan ignition plant. All national laws andregulations about heating systems mustalso be followed. DangerRisk of injury!– Only use original high-pressure hoses.– The high-pressure hose and the injec-tion system must be suitable for themaximum operating pressure given inthe Technical Data.– Avoid contact with chemicals.– Check the high-pressure hose daily.Do not use hoses with kinks.Stop using the high-pressure hose if theexternal wire layer is visible.– Do not use the high-pressure hose any-more if the winding is damaged.– Lay the high-pressure hoses in such away that no vehicle can drive over it.– Do not use high-pressure hoses thathave been driven over, kinked, pressedor bent even if there is no externally vis-ible damage.– Store the high-pressure hoses in such away that they are not subject to any me-chanical load.Safety devices serve for the protection ofthe user and must not be put out of opera-tion or bypassed with respect to their func-tion.Please do not let mineral oil contaminatedwaste water reach soil, water or the sew-age system. Perform engine cleaning andbottom cleaning therefore only on speci-fied places with an oil trap.Safety instructionsGeneral notes on safetyHigh pressure hoseSafety Devices18 EN