English 9Detergents can only be applied withthe black detergent nozzle." STEP 1:Install the black detergent nozzle fordetergent application (will work atlow pressure only)." STEP 2:Adjust the filter end of the detergenttube for light (- / 0.15 gpm), or maxi-mum (+ / 0.20 gpm)" STEP 3:Fill a container with K‰rcher deter-gent. Place the filter end of detergentsuction tube into the container." STEP 4:With the engine running, pull triggerto operate unit.Liquid detergent is drawn into theunit and mixed with water.Apply detergent to work area.Do not allow detergent to dry on surface." STEP 5:Always draw fresh water throughthe detergent suction tube when thecleaning job is done, to rinse/flushany remaining detergents from theinjection system.For best results see Cleaning Tipsfor specific information on how toclean different surfaces. CAUTIONThis unit has been designed for use withcleaning detergents recommended bythe manufacturer. The use of other clean-ing detergents may affect the operation ofthe machine and void the warranty.Never use:ñ Bleach, Chlorine products and othercorrosive chemicalsñ Liquids containing solvents (i.e.,paint thinners, gasoline, oils)ñ Tri-sodium phosphate productsñ Ammonia productsñ Acid-based productsThese chemicals will harm the unit andwill damage the surface being cleaned.Use of these items will void the war-ranty.Always Use K‰rcher Detergent forBest ResultsK‰rcher biodegradable detergents arespecially formulated to protect the envi-ronment and your pressure washer. Thespecial formula wonít clog the suctiontube filter and will protect the internalparts of the pressure washer for a long-er life. For K‰rcher Detergents, checkyour retailer or visit our website:www.karcher-usa.com/homeWORKING WITH DETERGENTSDetergents