K-array KA7 User Manual

Contents

K-array KA7 User Manual Manual pdf 6 page image

ENGLISH6SAFETY INSTRUCTIONWARNING• To reduce the risk of electric shock, disconnect the amplifier from the AC mainsbefore installing audio cable. Reconnect the power cord only after making all signalconnections.• Connect the amplifier to a two-pole, three wire grounding mains receptacle. Thereceptacle must be connected to a fuse or circuit breaker. Connection to any other typeof receptacle poses a shock hazard and may violate local electrical codes.• Do not install the amplifier in wet or humid locations without using weather protection.• Do not allow water or any foreign object to get inside the amplifier. Do not put objectscontaining liquid on, or near, the unit.• To reduce the risk of overheating the amplifier, avoid exposing it to direct sunlight. Donot install the unit near heat emitting appliances, such as a room heater or stove.• No naked flame sources such like lighted candles should be placed on the device.• The amplifier should be placed so that its location does not interfere with its properventilation. For example, the appliance should not be situated on a bed, carpet, orsimilar surface that may create an obstacle for the ventilation openings.• CAUTION, RISK OF ELECTRIC SHOCK, DO NOT OPEN. This amplifier containspotentially hazardous voltages. Do not attempt to disassemble the unit. The unitcontains no user serviceable parts. Repairs should be performed only by factory trainedservice personnel.• Be sure that both voltage set by the selector on the device and AC Power have thesame value.