Menu
Jilong 29P414US User Manual
          | |
9FP4-14-GB(V4)www.jilong.comClean the filter cartridge with a garden hose using a direct powerfulwaterspray.If the filter cartridge cannot be cleaned effectively in this manner, it istime to replace it with a new cartridge.Your clean (or new) cartridge can be put back into the filter chamberand you can refer to the installation instruction on page 3 to re-assemble the filter pump unit.Trouble Shooting GuidePUMP DOES NOT OPERATE:Check to make sure pump unit power cord is plugged into GFCI outletproperly.Check to GFCI for proper operation according to GFCI manufacturer’sinstructions.Check for blown fuses or tripped circuit breakers.Check to see if motor is too hot, this may cause overload andshutdown.MOTOR RUNS, BUT DOES NOT PUMP WATER OR WATERFLOWIS TOO SLOW:Check for possible obstructions inside of intake hose or discharge hoseinside of pool wall.Tighten all hose clamps.Check all hoses for possible damage.Clean or replace filter cartridge.PUMP LOSES PRIMEMake sure there are no leaks in connection hoses.Clean or replace filter cartridge.FILTER DOES NOT CLEAN POOLCheck PH and chlorine level in pool, following the instructions of yourlocal pool supply retailer.Clean or replace cartridge.Check for holes in cartridge. Replace if necessary.Try running filter pump for a longer period of time each day.Clean the debris (that may have gathered) away from strainer screenat pool wall |
Related manuals for Jilong 29P414US
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved