Jari Monarch Owner's Manual
Contents |
CAUTIONNever attempt to work on your Jari Mower without first removing the spark plug or wire from spark plug. Neverwear loose clothing near the unit when the engine is operating. Before starting the engine, clear the area of adults,children and pets. A sudden gust of wind and/or an unexpected move on somebody’s part can change what was a safesituation. Always exercise caution during the operation, handling, parking or storage of your mower. Shutting off andallowing engine to cool is necessary before refueling. Stop engine before attempting to clean any debris from knife assembly.MONARCHMODEL C REPAIR PARTS LIST AND OWNERS MANUALSerial No. 93878 and laterLUBRICATION (5 Zerks)Use heavy-duty gun grease every 3 hours of operation. If one grease retainer, such as item #39 used in conjunction withpart requiring grease, grease until grease appears at the retainer. If two grease retainers are used, such as with eachwheel or dual pulley #59, grease until grease appears at both retainers. It is not necessary to remove fender for greasing.Drive shaft has sealed ball bearings, which do not require greasing.Jari Serial Number: (located on frame under engine)Date Purchased:Engine (2 numbers located on engine in form of decal and/orstamped into flywheel housing)Make: H.P.:Jari Mowers, LLC54456 Gadwall Rd.Mankato, MN 56001Phone: 507-625-3340Fax: 507-388-3973Email: info@jarimowers.comwww.jarimowers.com |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved