Jandy VersaTemp JRT Series Installation And Operation Manual

Also see for JRT2000R: Installation and operation manual

Jandy VersaTemp JRT Series Installation And Operation Manual Manual pdf 1 page image

VersaTemp™ JRT Series Heat PumpWARNINGFOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which theproduct will be installed where such state or local requirements exist. The maintainer must be a licensed HVAC technician certified in heat pump repair andmaintenance by the jurisdiction in which the product will be installed where such state or local requirements exists. The technician must possess and comply with allcertifications and regulations regarding the purchasing, handling, transportation and reclamation of R410A refrigerant. In the event no such state or local requirementexists, the installer or maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions inthis manual can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this product. Failure to followwarning notices and instructions may result in property damage, personal injury, or death. Improper installation and/or operation may void the warranty.Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property damage, or death.ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product.This information should be given to the owner/operator of this equipment.Installation and Operation ManualManuel d’installation et d’utilisationManual de instalación y operación