Menu
JVC dla-rs600 Instruction Manual
                                                                                |
Adjusting the Screen Size (Aspect)The screen size of the projected image can be adjustedoptimally according to the original screen size (aspect)that has been input.1 Press the [MENU] button to displaythe menu2 Select “Input Signal”"“Aspect” fromthe menu.MENU BACKAuto16:9AutoPicture Position3D SettingProgressiveMaskAspectColor SpaceInput LevelInput SignalAutoAHDMI2 EDIDBackOperateSelectExitSetting Description4:3 Sets the screen size to 4:3. ForHD signals, the two sides arereduced.Displayedonly duringvideo signalinput.16:9 Sets the screen size to 16:9.For SD signals, the two sidesare expanded.Zoom Enlarges the entire image.* Not selectable in the case ofHD signals.Auto Positions the image at thecenter with the entire imageenlarged.Displayedonly duringPC signalinput.Just Displays the input image in theactual size.Full Fills the entire screen with theimage with the size (aspect) ofthe input image ignored.0 This item is grayed out and cannot be adjusted whenthere is no signal, signal is out of range, or during 3Dor 4K input.3 Press the [MENU] button to exitExample of input image and screen sizeHDMI Signal Input.Zoom16:94:34:32.35:1(CinemaScope)SettingInput ImageOutput ImagePC Signal Input.1280×1024FullJustAutoSettingOutput ImageInput Image27Operate |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved