JVC XA-GC20BK Instructions Manual

Also see for XA-GC20BK: Instructions Instructions

Contents

8How to Mount the Infrared Address Transmitter (XA-GT1TN)The Infrared Address Transmitter can be secured to either a cable or a ceiling railing.Settings for each switch1 Setting the address• Set the desired address with the rotary switch.(000 - 255)Slotted screwdriver used for clocks(2 mm diameter - sold separately)2 Setting the Auto/Point switch• To enter the AutoStart mode• Set the switch to “A”Auto.• To enter thePointing mode• Set the switch to “P”Point3 Setting the Master/Slave switch• The switch is now setto “M” master.Regarding connections to the power sourceExample:Connect to standard household poweroutlet or a ceiling outlet with a safetyplug.Power adaptor(sold separately)Connect to DC12V/0.4AA PA PM S